Banner SX5-B - SX Series Laser Scanner Models; Scanner Features; Scanner Limitations

2.1 Models
A SX Series Safety Laser Scanner System refers to the laser scanner, cordsets (ordered separately), and mounting
hardware (ordered separately). Interfacing solutions include safety modules, controllers, and muting modules.
Model Description Max Safety Range (m) Connections (pins)
SX5-B* SX5 Safety Laser Scanner, stand-alone model 5.5 8
SX5-B6* SX5 Safety Laser Scanner, updated stand-alone model 5.5 8
SX5-ME70 SX5 Safety Laser Scanner, master model with encoder inputs 5.5 17 + 8
SX5-M70 SX5 Safety Laser Scanner, master model 5.5 17 + 8
SX5-M10 SX5 Safety Laser Scanner, master model 5.5 12 or 8
SX5-R SX5 Safety Laser Scanner, remote model 5.5 8
* The SX5-B6 is an updated stand-alone model with more features than the SX5-B. Use the SX5-B6 model in new
installations of stand-alone systems.
The following items, ordered separately from the scanner, are required to make a complete system.
Qty Description
1 Mounting hardware (If desired, can mount directly to a surface)
1 Machine interface cable
1 M12 Ethernet cable
Important: Configuration software is required. The software is available at www.bannerengineering.com/
SX5.
2.1.1 Features
Figure 2. Features
2
1
3
*
4
5
6
*
connectors vary depending on model
1. Display
2.
LED indicators
3. Stand-alone model only: M12 Ethernet connector
cover
4. Keypad
5. Scanner window
6. Scatter screen
2.1.2 Scanner Limitations
Environmental limitations — The
SX Series Safety Laser Scanner is not suitable for use outdoors or under conditions with
significant temperature fluctuations. Humidity, condensation, and other weather influences can impair the safety function.
• Use the SX only in environmentally controlled areas.
• Observe all technical data and ambient conditions.
SX Safety Laser Scanner
8 www.bannerengineering.com - Tel: + 1 888 373 6767