Figure 58. Configuration Settings screen
The Application section of the Configuration Settings page allows users to define the application by selecting the
scenario.
• Expert Scenario selection provides the maximum configuration possibilities for the device; contains the entire set of
parameters, regardless of the device use.
• Vertical Scenario selection provides the extra features/requirements necessary for vertical applications, committing
the user to insert the reference point parameter.
Select the connector connection(s) planned for the application. The configuration manages the pins relative to the
connector(s) selected (option vary by model selected).
It is possible to edit some of the parameters under the Configuration header, such as:
•
Name—A name to identify the configuration
• Author—A name to identify the author (defaults to computer name but can be changed)
• Description—A short text description to identify the configuration
• GUI Version—(Read-Only) The software version of the GUI
• Safety Signature—(Read-Only) This is automatically generated to be a unique identifier that includes the scanner,
configuration, creation date-time
• Creation Date—(Read-Only) The date and time the configuration was created
• Cluster Name—A name to identify the cascade string of scanners
• Scanner—A name to identify the scanner
To proceed with the configuration, click on the white > on the upper right side of the main panel. To go back to the previous
page, click on the white <.
Save the configuration at any time using the Save icon on the tool bar.
SX Safety Laser Scanner
80 www.bannerengineering.com - Tel: + 1 888 373 6767
To Next Page
Loading...
