Barco ICMP User Manual

4. Troubleshooting
Code 10752: “settings - invalid clip properties - cannot save clip” (Error)
Situation Solution
Some clip properties are not
valid.
Check the clip properties.
Code 10753: “settings - clip not found - cannot delete clip” (Error)
Situation Solution
The clip cannot be deleted
because it is not found on the
system.
Check the clip is still present on the system.
Code 10900: “player - command rejected” (Error)
Situation Solution
The command was rejected
because the player is busy
with some operation.
Wait for the player to end the current operation.
The command was rejected
because the player has been
busy with some operation for
several minutes: player is
stalled.
Restart the projector. If the problem persists, escalate the issue
including a log package from the system.
Code 10901: “player - storage not available - selection failed” (Error)
Situation Solution
The player cannot select
content because the HDDs
for the local storage are not
present.
Insert HDDs for the local storage.
The player cannot select
content because the local
storage was not mounted.
Restart the projector. If the problem persists, escalate the issue
including a log package from the system.
The player cannot select
content because the local
storage is in error.
Repair or replace the failed HDDs.
Code 10903: “player - content not found - selection failed” (Error)
Situation Solution
The player cannot select
content because it is not on
the local storage.
Check that the content is present on the local storage.
Code 10904: “player - content read error - selection failed” (Error)
Situation Solution
The player cannot select
content because an error
occurred while reading the
content.
Restart the projector. If the problem persists, esc
alate the issue
including a log package from the system.
R5906594 ICMP 09/11/2016 49

Barco ICMP Specifications

General

Brand	Barco
Model	ICMP
Category	Server
Language	English