K5902108-04 Coronis Fusion 4MP / 6MP 41
8. Display controller box (optional)
9. Touch pad box (optional)
How to repack your display
1. Place the empty box on a stable surface.
2. Slide the system disc, documentation disc and user guide in the dedicated bag attached at the inside of the
box.
3. Place the bottom buffer in the box.
4. Put the power supply in the dedicated cavity of the bottom buffer.
5. Put the Coronis Fusion 4MP / 6MP display in its original bag and place it in the box with its panel facing
downwards.
6. Put the top buffer on top of the display.
7. When applicable, slide the display controller box and / or touchpad in the dedicated cavity of the top buffer.
8. Put all cables (video, USB, power) in their original bag and slide them in the dedicated cavity of the top buffer.
9. Close and seal the box.
Repackaging instructions
To Next Page
Loading...
Need help?
General
