Barco MDSC-1119 Getting Started Guide

Cleaning instructions
30
2. Remove fingerprints or grease using a lint-free, non-abrasive soft
cotton cloth that is lightly moistened with plain water or a mild
commercial glass cleaning product suited for coated glass surfaces.
The following products are tested and approved:
• Misty Clear Lemon 10 Disinfectant
• Bohle glass cleaner
• Zep Heavy-duty glass & all surface cleaner
• Klear Screen
• Screen TFT (Kontakt Chemie)
• Incidin Foam (Ecolab)
•Microzid
• Mild detergent
• Isopropyl alchohol with concentration < 5%
• Household bleach (generic sodium hypochlorite, solutions of
5.25% sodium hypochlorite diluted with water between 1:10
and 1:100)
3. Gently wipe dry with a dry cloth.
Do NOT use:
• Alcohol/solvents at higher concentration > 5%
• Strong alkalis lye, strong solvents
•Acid
• Detergents with fluoride
•Detergents with ammonia
• Detergents with abrasives
• Steel wool
• Sponge with abrasives
• Steel blades
• Cloth with steel thread

Barco MDSC-1119 Specifications

Display Specifications

technology	TFT Active Matrix LCD
native resolution	1280 x 1024
active screen diagonal	19 inches
active screen area	14.8 x 11.9 inches
pixel pitch	0.294 mm
brightness	300 cd/m2
contrast ratio	700:1
viewing angle	178 degrees

Connectivity and Control

analog video inputs	1x universal 5BNC, VGA (DB15), S-Video (4-pin mini DIN), SDI (BNC)
digital video inputs	DVI-I
communication	RS232 (9-pin D-Sub)

Supported Resolutions and Formats

horizontal scan frequencies	15-100 kHz
vertical scan frequencies	50-120 Hz
bandwidth	165 MHz

Power Requirements

external DC power supply	90-264 VAC
display voltage	20-24 VDC
power consumption	80 Watt max

Physical Characteristics

display dimensions	427 x 356 x 81 mm
display weight	8 kg
mounting	75 & 100mm VESA