EasyManua.ls Logo

Barco MDSC-1119 - UCTMP User Color Temperature

Barco MDSC-1119
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning instructions
29
Cleaning instructions
Precautions
Precautions
Before cleaning, switch the display in stand-by position to
prevent the control touch keys from being activated
inadvertently by sweeping over the front filter. In stand-by
position the touch keys cannot be activated by just sweeping
over them. To switch the display on again, you must press the
stand-by touch key for a few seconds.
Take care not to damage or scratch the front filter or LCD panel.
Be careful with rings or other jewelry that can touch the front
filter.
Do not apply pressure on the front filter or LCD panel.
Do not apply or spray liquid directly to the front filter, panel or
cabinet as excess liquid may cause damage to internal
electronics. Instead, apply the liquid to the cleaning cloth.
Follow your hospital protocol for the handling of blood and body
fluids.
The display is not disinfected or packed in sterile environment.
Follow your hospital protocol in case the display needs to be
disinfected prior to intallation.
Follow your hospital protocol for the handling of blood and body
fluids.
Front filter
Proceed as follows:
1. Remove dust with a dry, lint-free, non-abrasive soft cotton cloth.

Other manuals for Barco MDSC-1119

Related product manuals