Barco MDSC-1119 Getting Started Guide

Cleaning instructions
31
Cabinet
Proceed as follows:
• Clean the cabinet using a soft cotton cloth, lightly moistened
with a recognized cleaning product for medical equipment.
• Repeat with water only.
• Wipe dry with a dry cloth.
• The cabinet has been tested for resistance to the following
products:
• Virex Ready-to-use Disinfectant Cleaner
• Misty Clear Lemon 10 Disinfectant
• Misty Multi-Purpose Disinfectant Cleaner
• Misty Multi-Purpose Disinfectant Cleaner II
• Bohle glass cleaner
• Zep Heavy-duty glass & all surface cleaner
• Klear Screen
• Screen TFT (Kontakt Chemie)
• Incidin Foam (Ecolab)
• Microzid
• Mild detergent
• Isopropyl alchohol with concentration < 5%
• Household bleach (generic sodium hypochlorite, solutions
of 5.25% sodium hypochlorite diluted with water between
1:10 and 1:100)
• Precise Hospital Foam Cleaner Disinfectant

Barco MDSC-1119 Specifications

Display Specifications

technology	TFT Active Matrix LCD
native resolution	1280 x 1024
active screen diagonal	19 inches
active screen area	14.8 x 11.9 inches
pixel pitch	0.294 mm
brightness	300 cd/m2
contrast ratio	700:1
viewing angle	178 degrees

Connectivity and Control

analog video inputs	1x universal 5BNC, VGA (DB15), S-Video (4-pin mini DIN), SDI (BNC)
digital video inputs	DVI-I
communication	RS232 (9-pin D-Sub)

Supported Resolutions and Formats

horizontal scan frequencies	15-100 kHz
vertical scan frequencies	50-120 Hz
bandwidth	165 MHz

Power Requirements

external DC power supply	90-264 VAC
display voltage	20-24 VDC
power consumption	80 Watt max

Physical Characteristics

display dimensions	427 x 356 x 81 mm
display weight	8 kg
mounting	75 & 100mm VESA