Technical information
48
iv. difference in color temperature as a result of not using all displays of a multi-head
configuration at the same rate.
v. LCD luminance uniformity that is in within the product specifications or luminance
uniformity performance that is inherent to LCD technology.
Barco nv, MID does not warrant a minimum life time nor a performance of any of the
consumables.
2.6
Replacement of moveable parts such as power cords, remote controls, …
2.7
Any product disassembly and installation costs at the operation site, travel expenses
and travel time to and from the operation site for the personnel in charge of the
repair works and transport charges.
2.8
Any failures resulting from an accident, negligence (such as but not limited to
removing or deleting system files & licensed software product files), misuse, circuit
failure or any change, damage due to fire, water, thunder or lightning, power failure
or fluctuation, disruption of communication lines or due to force majeure, or any
reason foreign to the equipment.
2.9
Any specific services or procedures, asked for by Customer, related to verification of
repaired equipment.
2.10 The evaluation cost in case of a returned product deemed functional is not
covered under warranty and will be charged to the Customer, at Barco’s sole
discretion, based on a case-by-case evaluation.
ARTICLE 3: OBLIGATIONS OF THE CUSTOMER
Customer hereby assumes the following obligations as partial consideration for Barco
nv, MID performance of its requirements under the warranty condition; failure by
Customer to meet its obligations under this paragraph shall excuse Barco nv, MID’s
performance hereunder:
3.1
Customer shall not expose Barco nv, MID personnel to any unsafe working
conditions.
3.2
Repairs to equipment under warranty resulting from improper maintenance or repair
performed by the Customer, or its officers, agents, employees, or representatives,
To Next Page
Loading...
Need help?
Display Specifications
