Barco Nio E-2621 - Page 29

Installing your Barco display controller
Nio display systems 29
Connecting your Barco displays
Figure 7:
Figure 8:
11. Reconnect any cables you have disconnected and plug in the
computer’s power cord.
MXRT 2100 & B
ARCOMED PCIe display controller Baseplate
X
Head 1 – DVI-I Connection
Y
Head 2 – DVI-I Connection
MXRT 5100 and MXRT 7100 Baseplate
X
Head 1 – DVI-I Connection
Y
Stereographics Connection
Note: This option is not supported in Nio Systems.
Z
Head 2 – DVI-I Connection