Installing drivers and software
50 Nio display systems
Figure 23: Barco Driver Removal Wizard
Command line (Silent) Install of Drivers and Software
Specifying the silent install option causes most of the GUI associated
with the installer to disappear. A background progress window will still
be visible, but no user input will be required.
The silent install behavior is dictated by the SETUP.INI file. Each
application is allowed to have separate command-line parameters for
normal and silent installs.
To install the drivers and software silently, please follow the steps
below:
1. Insert the B
ARCO NIODisplay System Installation CD-ROM into your
CD/DVD drive. When the Barco Product Installation Wizard starts
click “Cancel”.
2. Click the Start button in the task bar.
3. Click Run.
4. Click Browse and
a) browse to the root directory of the B
ARCO NIODisplay System
Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
To Next Page
Loading...
