Installing drivers and software
Nio display systems 51
or
a) browse to the root directory of the location where you
saved the contents of your B
ARCO NIODisplay System
Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of the
line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
D:\Setup.exe -silent
See figure 24 for an example of how the command line window
should look when using the silent install from the B
ARCO NIODisplay
System Installation CD-ROM.
Figure 24:
Installing the BARCOMED drivers and software
Note: The installation dialog will display in English if your
operating system’s language is not supported.
This process applies to the following versions of Windows:
• Windows 2000 Professional,
• Windows XP Professional,
• Windows Professional x64 Edition,
• Windows Server 2003, and
To Next Page
Loading...
