Barco UDX

R5906113 /08 UDX50
Image 5-14: Unlock the lens
2. Pull down the secondary lock on the lower left side of the lens holder as illustrated (Image 5-15).
3. Gently pull the lens out of the lens holder.
Image 5-15: Lens removal
It's recommended to place the Lens caps of the original Lens packaging, back on both sides of the
removed Lens to protect the optics of the Lens.
It's recommended to place the dust cover of the original projector packaging back into the lens
opening to prevent intrusion of dust.
Lenses & Lens selection