5
Specification
Using measurement methods described in ETS 300-373
.
General Specifications
Equipment BARRETT 2050 transceiver local (desk top) and remote (trunk mount) configurations.
Standards Exceeds/complies with Australian/ New Zealand standard
AS/NZS 4770:2000 and AS/NZS 4582:1999
Exceeds/complies with European standard ETSI 300 373 and associated Amendment A
Exceeds/complies with EMC and vibration standard IEC 945
Complies with MIL Spec. 810 F for drop, dust, temperature, shock and vibration.
FCC approval number 2050:- OW4-BARRETT2050HF
Industry Canada approval number 2050:- 6468A-2050HF
FCC approval number 2040 configuration:- OW4-BARRETT2040HF
Industry Canada approval number 2040 configuration:- 6468A-2040HF
Transmit frequency range 1.6 MHz to 30 MHz (continuous)
2 MHz to 29.1 MHz (continuous) USA and Canada
Receive frequency range 500 kHz to 30 MHz (continuous)
Channel capacity Up to 500 programmable channels (simplex or semi-duplex)
Frequency resolution 10 Hz program mode 1 Hz tunable receiver
Frequency stability ±10 Hz or better than 0.3 PPM over temperature range - 30°C to +
70°C
Intermediate frequencies 45 MHz and 455 kHz (double conversion)
Operating modes J3E (USB, LSB) - H3E (AM) - J2A (CW) - J2B (AFSK)
Optional J2B (AFSK) with narrow filter.
Note:- Only J3E (USB) available in USA and Canada
Operating temperature -30°C to +60°C (-35°C to +70°C at reduced specification)
Humidity 95% relative, non-condensing
Display system Super-twist backlit LCD graphics display 128 x 64
Controls 23 key keypad - illuminated
Programming interfaces Infrared (IrDA) and RS-232
Supply voltage 13.8V DC + 20% / - 10% (negative ground) Polarity protected. Over
voltage protected.
Current consumption 470mA receive (muted, back lighting off)
Antenna impedance 50 Ohms unbalanced
Weight 2050 local control configuration 2.58Kg.
2050 remote (trunk mount) configuration, main unit 2.36Kg.
2050 remote (trunk mount) configuration, control head 0.22Kg
To Next Page
Loading...
