Bartec USA TPMS PRO Series User Guide Rev5.1 Table of Contents
Page 25
3.6 TBYT Toolkit
While on the Operations screen of the Test Before You Touch function, you can access the
TBYT Toolkit by using the arrow keys to navigate to the wrench icon, then pressing Enter to
open the menu.
OBD (300PROC and 400PRO Only)
The OBD function will pull existing OBDII data (e.g. VIN, sensor IDs, DTCs) from the vehicle
and display it. Connect the tool to the vehicle via the OBDII cable, select OBD from the TBYT Toolkit menu, and press the Enter
key to start the search.
Sensor Search
The Sensor Search function can be used to identify unknown sensors.
Place the sensor at the top of the tool (or position the tool accordingly
if the sensor is installed in the wheel – see Section 2.3
) and select
Sensor Search from the TBYT Toolkit menu, then press the Enter key
to start the search. The tool will display any results found.
NOTE:
Reprogrammable sensors that have not yet been programmed
will not be detected by this search function.
RKE Test
RKE Test is also available through the Home > Toolkit menu; see Section 7.2
for details.
To Next Page
Loading...
Need help?
General