Basalte B.link - Page 20

B.link
Manual
20 / 32 v.1.1 © 2014 basalte
5.1.2 Learn IR Codes
Launch the Basalte Learn Utility
With the Basalte Learn utility, the B.link Flex module can be used to capture IR generated by a
remote control. This tool allows for the capture of IR commands and save them in Global Caché or
Hex (CCF) formats.
Once you have the Basalte Learn application up and running, select iTach Learner under the IR
Learner dropdown list, and enter the B.link Flex IP Address. If the IP address is not known, use
the Basalte Discovery application to learn the IP address.
Press Connect, and now your Basalte Learner is ready to receive IR transmissions.