Revision History AW00097209000
114 Basler IP Fixed Box Cameras
AW00097207000 24 Apr 2013 Updated the Support contact information in the Contacting Basler Support
Worldwide section (see page 2).
Updated the Frame Rate Mode parameter description (see page 21).
Added the Capped VBR value to the Encoder Mode parameter
(see page 31).
Updated the Quality (see page 31) and Maximum Bitrate parameters
(see page 32) to reflect their use with the Capped VBR mode.
Added missing standard sizes to the Output Size parameter description
(see page 32).
Added information about the second text overlay to the description of the
Text Overlay dialog box (see page 35).
Added the descriptions of the new Overlay Text parameter values
(see page 35).
Updated the descriptions of the Overlay Position parameter values
(see page 36).
Updated the descriptions of the Overlay Size parameter values
(see page 36).
Updated the description of the Overlay Style parameter (see page 36).
Added the descriptions of the new buttons (+Image, Clear, Revert All
Changes, View Current Overlay Image, Upload New Overlay Image, Close)
in the Text Overlay dialog box (see page 37).
Added section about using images in stream overlays (see page 38).
Added descriptions of the new Multicast Stream and Multicast Metainfo
parameters on the RTSP tab (see page 54).
Added the new Available Streams via ONVIF parameter description
(see page 56).
Added the value External Trigger in for the Function parameter
(see page 58).
Added descriptions of the new External Clock Synchronization and NTP
Synchronization Period parameters in the System parameter group
(see page page 73).
Removed the NTP parameter in the System parameter group.
Updated Standards information in Table 4, Table 5, and Table 6
(see Section 8).
Added SD card information throughout the manual.
Doc. ID Number Date Changes
To Next Page
Loading...
Need help?
General
