Configuring the Camera AW00097209000
72 Basler IP Fixed Box Cameras
3.11 System Parameters
The parameters in the System group provide some basic information about the camera and allow
you to set basic system characteristics such as the date and time.
3.11.1 Info Tab
3.11.2 Date/Time Tab
The following symbols can be entered in the Date Time Format box:
Manufacturer Name - Indicates the name of the camera’s
manufacturer.
Model Name - Indicates the camera’s model name.
Firmware Version - Indicates the version number of the firmware
currently installed in the camera.
Serial Number - Indicates the camera’s serial number.
MAC Address - Indicates the camera’s MAC address.
Set Date Time - Sets the date and time that will appear in the text
overlay on streamed images (see page 35 for more information
about the text overlay). Click the button to display a calendar that
will let you easily set the date and time.
The time is set based on a 24 hour clock.
Date Time Format - Sets the format for the date, time, and time
zone entry that will appear in the text overlay on streamed images.
$d = display the day of the month as a decimal number (i.e., from 01 to 31).
$D = same as entering $m/$d/$y.
$F = same as entering $Y-$m-$d.
$h = display the abbreviated month name.
To Next Page
Loading...
Need help?
General
