Configuring the Camera AW00097209000
18 Basler IP Fixed Box Cameras
IR Filter Wait Time - Sets the amount of time in seconds that the value of the IR Filter Current
Level must remain above the IR Filter Switch Level setting before the camera will switch from day
mode to night mode. It also sets the amount of time in seconds that the value of the IR Filter
Current Level must remain below the IR Filter Switch Level setting before the camera will switch
from night mode to day mode.
A feature called the IR filter announce mode can use one of the camera’s I/O ports
to "announce" the current mode (night or day) of the IR-cut filter. For more
information, see page 91 and also Section 3.9.1 on page 57.
To Next Page
Loading...
Need help?
General
