Basler BIP2-XXXXc User Manual

Configuring the Camera AW00097209000
32 Basler IP Fixed Box Cameras
If the Encoder Mode parameter is set to Capped VBR, you can also set the desired quality of the
stream by using the Quality parameter.
Note that the effect of the quality setting is not precisely equivalent for each encoder type. For
example, a quality setting of 50 will have a slightly different effect when the Encoder Type parameter
is set to JPEG than it will have when it is set to MPEG4 or to H.264.
Bitrate - If the Encoder Mode parameter is set to CBR, then the Bitrate parameter sets the bitrate
for the stream.
If the Encoder Mode parameter is set to CVBR, then the Bitrate parameter sets the bitrate for the
stream when there is no motion in the scene.
Maximum Bitrate - If the Encoder Mode parameter is set to CVBR, then the Maximum Bitrate
parameter sets the maximum bitrate for the stream when there is motion in the scene.
If the Encoder Mode parameter is set to Capped VBR, you can use the Maximum Bitrate parameter
to ensure that the bitrate doesn’t rise above a certain value when trying to achieve the quality value
set with the Quality parameter.
Output Size - Lets you select from a list of standard image sizes. When you select a size, the
camera checks the setting of the Output Scaling parameter. It then automatically sets the Stream
AOI Left, Stream AOI Top, Stream AOI Width, and Stream AOI Height parameters so that the AOI
will be centered on the sensor and set to the correct width and height to result in output images of
the size you selected.
Note that depending on the current setting of the Output Scaling parameter, some of the standard
sizes normally available may not be listed.
The sizes available in the list will vary depending on the camera model you are using, and the list
will only include output sizes that can be achieved given the current Output Scaling parameter
setting. The list below contains all possible sizes.
 Auto = The image size is non-standard. (Whenever you manually change the Stream AOI
Width parameter or the Stream AOI Height parameter to a value that will not result in standard
size image output, the value of the Output Size parameter will change to "Auto").
 2560 x 1920 = the size of the images in the stream will be 2560 x 1920.
 1920 x 1080 (Full HD) = the size of the images in the stream will be 1920 x 1080.
 1600 x 1200 (UXGA) = the size of the images in the stream will be 1600 x 1200.
 1408 x 1152 (16CIF) = the size of the images in the stream will be 1408 x 1152.
 1280 x 1024 (SXGA) = the size of the images in the stream will be 1280 x 1024.
 1280 x 960 = The size of the images in the stream will be 1280 x 960.
 1280 x 720 (HD 720) = The size of the images in the stream will be 1280 x 720.
 1056 x 864 (9CIF) = The size of the images in the stream will be 1056 x 864.
 1024 x 768 (XGA) = The size of the images in the stream will be 1024 x 768.
 800 x 600 (SVGA) = The size of the images in the stream will be 800 x 600.
 720 x 576 (D1 PAL) = The size of the images in the stream will be 720 x 576.
 720 x 480 (D1 NTSC) = The size of the images in the stream will be 720 x 480.
 704 x 576 (4CIF) = The size of the images in the stream will be 704 x 576.

Basler BIP2-XXXXc Specifications

General

Brand	Basler
Model	BIP2-XXXXc
Category	Security Camera
Language	English