AW00097209000 Configuring the Camera
Basler IP Fixed Box Cameras 51
Storage Location - Sets the location where the live stream should be saved.
SD Card = The live stream will be saved to an SD card. For information about the SD card
settings, see page 51.
FTP Server = The live stream will be saved to an FTP server. For information about the FTP
server settings, see page 52.
Video File Length [s] - Sets the maximum length in seconds of an individual live stream video
segment saved to the SD card or to the FTP server. The live stream(s) is/are saved in the form of
many individual live stream video segments in a raw image format.
Each video segment has a defined length in seconds. Values from 0 to 60 seconds are allowed.
Note that for JPEG encoded streams, a value of 0 causes the camera to store single images.
3.7.2 SD Card Tab
Note that if the value of the Live Memory Allocation [%] is set to 0%, recording of live streams to
the SD card is effectively turned off. If the value is set to 100%, however, saving of alarm data to
the SD card is effectively turned off.
Overwrite Live Recordings - Check the Overwrite Live Recordings box to allow the camera to
overwrite the oldest live stream files saved to the SD card if it is attempting to save new files and
the portion of the memory space that is currently allocated for live stream data storage is full. This
portion is determined by the setting of the Live Memory Allocation [%] parameter (see above).
If the box is not checked and the allocated memory space on the SD card is full, the live stream(s)
will not be saved.
Show SD Card Contents - Click the Show SD Card Contents button to access the SD card’s file
structure via an FTP server that is built into the camera. When you click the button, the browser will
open a new window, will connect to the camera via the FTP server, and will display the root level
SD Card Inserted - Indicates the presence of an SD card in the
camera. If the box is checked, an SD card is inserted.
SD Card Capacity [KiB] - Indicates the storage capacity of the
SD card in kilobytes.
Space Available [KiB] - Indicates the amount of free space
available on the SD card in kilobytes.
Live Memory Allocation [%] - Sets the percentage of free space
available on the SD card that should be allocated for live stream data
storage. The default setting is 50%. The remaining memory space is
used for alarm data storage.
When you adjust this setting, you will notice that it must be changed
in fixed increments of 10%.
To Next Page
Loading...
Need help?
General
