AW00097209000 Configuring the Camera
Basler IP Fixed Box Cameras 69
To Add a New User
1. Click the New User button on the User Management tab. A User Editor window will appear as
shown below.
2. Enter a user name, select a user level (see Table 2 on page 68), enter a password, reenter the
password to verify, and click the Save button.
3. A Success message window will open. Click the OK button.
To Delete an Existing User
1. On the User Management tab, click on the name of the user you wish to delete. As shown
below, the user information will become highlighted, and the Delete User button will become
ungrayed.
2. Click the Delete User button.
3. An Are you sure message window will open. Click the Ye s button.
To Next Page
Loading...
Need help?
General
