9287500991 Rev K DECS-100 BESTCOMS Software 5-23
Figure 5-24. Settings File Reminder Dialog Box
Clicking No allows you to exit the upload process so that a DECS-100 settings file can be created. Refer
to the Settings Files subsection for information about creating a settings file.
Clicking Yes continues with the upload process and displays the Open dialog box of Figure 5-25. The
Open dialog box is used to locate and select the appropriate file for uploading to the DECS-100. Only files
with a .S19 extension are displayed in the Open dialog box.
Figure 5-25. Open Dialog Box
6. Select the appropriate file for uploading and click the Open button to start the file transfer. A dialog
box (Figure 5-26) indicating the progress of the file transfer is displayed.
Figure 5-26. File Transfer Progress
Once the transfer is complete, the device information is displayed in the right-hand column of the DECS-
100 Embedded Program Loader (Figure 5-26). The displayed program version number indicates the
version and date of the firmware just loaded.
To Next Page
Loading...
