20-12 9440300990
BESTCOMSPlus
®
Software DECS-250
Automatic Metering Export
The auto export metering function automatically exports metering data over a user-defined period when a
DECS-250 connection is active. The user specifies the Number of Exports and the Interval between each
export. Enter a filename for the metering data and a folder in which to save. The first export is performed
immediately after clicking the Start button. Click the Filter button to select specific metering screens.
Figure 20-10 illustrates the Auto Export Metering screen.
Figure 20-10. Auto Export Metering Screen
Firmware Updates
Future enhancements to the DECS-250 functionality may require a firmware update. Because default
settings are loaded when DECS-250 firmware is updated, your settings should be saved in a file prior to
upgrading firmware.
Warning!
Before performing any maintenance procedures, remove the DECS-
250 from service. Refer to the appropriate site schematics to ensure
that all steps have been taken to properly and completely de-energize
the DECS-250.
To Next Page
Loading...
