Basler DECS-250 - Page 187

9440300990 21-19
DECS-250 BESTlogic™Plus
Name Description Symbol
SCL SELECT
SECONDARY
SETTINGS
When true, this element selects the
secondary settings for SCL.
SOFT START
SELECT
SECONDARY
SETTINGS
When true, this element selects the
secondary settings for softstart.
START ENABLE When true, this element starts the unit.
STOP ENABLE When true, this element stops the unit.
Transfer Watchdog
Trip
When true, this element opens the transfer
watchdog output.
UEL DISABLED IN
MANUAL MODE
When true, this element disables UEL when
the unit is operating in Manual mode.
UEL SELECT
SECONDARY
SETTINGS
When true, this element selects secondary
settings for UEL.
UNDERFREQUENCY
V/HZ DISABLE
When true, this element disables the V/Hz
Underfrequency limiter.
USER
PROGRAMMABLE
ALARM 1 - 16
When true, this element triggers a
programmable alarm.
VAR LIMITER
SELECT
SECONDARY
SETTINGS
When true, this element selects the
secondary settings on the Var limiter.
VAR/PF MODE The var input selects var control and the PF
input selects power factor control.