9440300990 23-5
DECS-250 Configuration
Device Information
BESTCOMSPlus Navigation Path: Settings Explorer, General Settings, Device Info
HMI Navigation Path: Settings, General Settings, Device Information, DECS-250
Device information includes user-assigned identification labeling and read-only firmware version
information and product information. Device information (Figure 23-5) is provided for the DECS-250,
CEM-2020 Contact Expansion Module, and AEM-2020 Analog Expansion Module.
Firmware and Product Information
Firmware and product information can be viewed on the HMI display and Device Info tab of
BESTCOMSPlus.
Firmware Information
Firmware information is provided for the DECS-250, optional CEM-2020, and optional AEM-2020. This
information includes the application part number, version number, and build date. Also included is the
version of the boot code. When configuring settings in BESTCOMSPlus while disconnected from a
DECS-250, an Application Version Number setting is available to ensure compatibility between the
selected settings and the actual settings available in the DECS-250.
Product Information
Product information for the DECS-250, CEM-2020, and AEM-2020 includes the device model number
and serial number.
Device Identification
The user-assigned Device ID can be used to identify DECS-250 controllers in reports and during polling.
To Next Page
Loading...
Need help?
General
