Revision History
284 Basler scout
AW00012510000 18 Feb 2009 Integrated information for the scA640-120fm/fc.
Added a note to Section 1.7 on page 35 indicating than an application note
regarding EMI/ESD control is available.
The text in sections Section 2 on page 41 and Section 3 on page 43 has
been revised to reflect that the pylon driver package is now downloadable
from the website.
Removed the incorrect information about a Device User ID parameter in
Section 9.18 on page 241 and replaced it with the correct information
about the Device ID parameter.
Added Section 12.2 on page 225 describing how to obtain an RMA
number.
AW00012511000 17 June 2009 Updated sensor name "Micron MT9V022" to "Aptina MT9V022" in
Section 1.2 on page 2.
Removed the notes designating the information about the scA1300-32fm/
fc cameras as preliminary in Section 1.2 on page 2.
Updated minimum allowed exposure timens in Section 7.7 on page 116.
Updated the constants C
1
, C
2
, and C
3
for scA1300-32fm/fc cameras in
Section 7.13 on page 144.
Added the digital shift feature in Section 9.4 on page 191.
Corrected the indications of x offset and y offset in Figure 68 in Section 9.6
on page 198 and in Figure 65 in Section 9.11.1.2 on page 216.
Added the reverse X feature in Section 9.8 on page 204.
Removed the statement that auto functions have no effect on frame rate in
Section 9.11.1 on page 214 and added a note that frame rate may be
affected if exposure auto is used Section 9.11.3 on page 223.
Added a reference to the reverse X feature in Section 9.11.1.2 on
page 216.
Replaced "Auto Gain Raw" by the correct "Gain Raw (All)" parameter
name in Section 9.11.2 on page 221.
Replaced "Auto Exposure Time Abs" by the correct "Exposure Time Abs"
parameter name in Section 9.11.3 on page 223.
Added the auto function profile feature in Section 9.11.4 on page 225 and
adjusted Section 9.11.2 on page 221 and Section 9.11.3 on page 223
accordingly.
Added the trigger delay feature in Section 9.14 on page 231.
Added the acquisition status feature in Section 9.15 on page 233 and
added a reference in Section 7.2.3 on page 80.
Added the high gain and auto functions factory setups and the standard
factory setup (formerly the "default set") in Section 9.19 on page 243.
Added descriptions about resetting the frame counter and about relating
frame and trigger input counter in Section 10.3 on page 249.
Corrected the maximum value for the frame counter in Section 10.3 on
page 249.
Added the trigger input counter feature in Section 10.5 on page 254.
Doc. ID Number Date Changes
To Next Page
Loading...
