Revision History
Basler scout 285
AW00012512000 14 Apr 2011 Integrated the scA1600-28fm/fc.
Updated European and U.S. phone numbers and U.S. contact address.
Indicated the availability of programming languages other than C++ for
use with pylon in Section 1.9 on page 37.
Changed the maximum allowed current for an output circuit to 50 mA in
Section 5.7.2.2 on page 60.
Modified input line assignment to take account of standard and legacy
modes in image acquisition control in Section 6.1.1 on page 65.
Added the Acquisition Trigger Wait signal to Section 6.2.1 on page 67.
Re-wrote Section 7 on page 77 to describe acquisition start trigger and
frame start trigger and to take account of standard and legacy modes in
image acquisition control.
Indicated that the maximum possible frame rate can not be achieved with
the acquisition mode parameter set to single frame in Section 7.3 on
page 83, Section 7.13 on page 144, and Section 7.14 on page 149.
Updated the exposure start delay values and the frame readout time
formula in Section 7.12 on page 141.
Updated C
1
, C
2
, and C
3
constants, formula 1, and the calculated
examples in Section 7.13 on page 144 and Section 7.14 on page 149.
Indicated the applicability of the gain calculation procedure for the
scA640-120 and scA1300-32, corrected the dB gain values at max. setting
for the scA640-120 and scA1300-32,and included a calculated example in
Section 9.1 on page 181.
Indicated the effect of the black level parameter setting for the scA640-120
in Section 9.2 on page 188.
Modified Section 9.14 on page 231 and Section 9.15 on page 233 to take
account of standard and legacy mode in image acquisition control.
Added events and parameter names in Section 9.16 on page 235, and
removed some descriptions for transfer to the "Camera Events" code
sample.
Rearranged sequence of sections 6 throug 8.
Removed the feedback page.
Doc. ID Number Date Changes
To Next Page
Loading...
