Page 6 For technical questions, please call 1-888-866-5797. 70813
SAFETY OPERATION MAINTENANCESETUP
Specifications
Electrical Rating 120VAC / 60Hz / 10A
Motor No Load Speed 1750 RPM
Blade Speed 3600 SFPM (High)
1800 SFPM (Low)
Throat Depth 13-3/8″
Cutting Height 8″
Table Pivot (Tilt) Capacity 3° (left) 45° (right)
Blade Size 1/8″ to 3/4″ W x 100″ L
Dust Port 4″ diameter
Weight 180 lbs.
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical
outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
WARNING! Bandsaw is heavy; use an assistant to help lift it from carton and assemble.
To Next Page
Loading...
