Bauer Junior II-W - Error Indication; Battery Change

Fig. 14
Fig. 15 Battery
Fig. 16
Fig. 17
1
2
Instruction Manual  Junior II
14
A = 500 hours or 1 year
B = 1000 hours or 1 year
C = 2000 hours or 2 years
• Battery symbol indicating that the lithium battery is low
and has to be changed. All data are stored and will not
be lost when changing battery.
The B-Timer is operated using the mode select and the enter
keys.
Error indication
If the temperature sensor in the unit should be defective, an
error message “Error 1” or “Error 2” is shown at the display
(Fig. 14). In this case the unit should not be used but sent to
the factory or the nearest BAUER representative for repair.
Battery change
The battery (1, Fig. 15) is merely inserted into the holder.
To change the battery remove two bolts and separate housing
from base plate. Remove plug (2) and pull out battery.
Make sure to use the same type battery (BAUER part no.
82743).