Bauer Junior II-W - Repair Instructions

Instruction Manual  Junior II
32
6. REPAIR INSTRUCTIONS
GENERAL
Preventive maintenance usually involves replacing the valves,
gaskets and sealing rings as well as carrying out the mainten
ance work. Repair work can be carried out on the compressor
block to a certain extent but a certain experience and skill is
necessary. It should be noted, however, that
- no repair should be carried out on the crankdrive nor on
the bearings
- safety valves are not repaired but always replaced com
pletely.
For many BAUER compressor units, workshop manuals are
available through our customer service.
For questions on maintenance and repair, please contact our
technical service department.