Baumuller SI4000 - Page 52

Installation
Operation Manual Safety I/O Terminals SI4000 / SO4000
Document no.: 5.08009.05 Baumüller Nürnberg GmbH
52
of 82
7.1
7.1.8.5 Configuration of the safety SO4000 Parameter in ProSafety
Figure 12: ProSafety
h Switch to „Bus Configuration“ with the mouse
and mark the „Local I/O module / SO4000“.
=> The field „Safety parameter“ will
be opened.
Here you can configure the SO4000 specific safety parameter
„Watchdog time“.