13
Power supply
protrac® is supplied with power from rechargeable or non-rechargeable batteries:
• Rechargeable battery type: NiMH Mignon 1.2V IEC LR6
• Non-rechargeable battery type: Alkaline batteries 1.5V IEC LR6
Charging the rechargeable batteries:
Ü Update and maintenance manual
SVP step voltage probes
The SVPs are used for sheath fault location.
To adjust the height of the SVPs:
» Press the button (1) in the recess on the
handle and set the desired height.
AGP operating state indicator
The LED on the AGP indicates the following operating states:
• (permanently on): The switching on process is underway.
• (flashing): The AGP is in pairing mode.
[Ü “Pairing protrac® system components”]
• (permanently on): The AGP is switched on and paired to the CU.
• (permanently on): The AGP is muted
(prevention of hearing damage).
• (permanently on): The switching o process is underway.
The AGP is automatically switched o if there is no Bluetooth® connection to a CU for
5 minutes.
protrac® pin-pointing system822-186-4
Product information
To Next Page
Loading...
Need help?
General
