Baur Protrac User Manual

8
Intended use
The protrac® pin-pointing system is used for
• Acoustic pin-pointing of cable faults
• Pin-pointing of cable sheath faults and faults due to earth contact using the step
voltage method
• Tracing
If the protrac® system and its components are not used in accordance with this stipula-
tion, safe operation cannot be guaranteed. The responsible body or operator is liable
for any personal injury and damage to property resulting from incorrect operation.
Proper use also includes
• compliance with all instructions in this manual, and all other applicable documents,
• compliance with the technical data and connection requirements given on the
rating plate and in this manual and any other applicable documents,
• compliance with the maintenance instructions for the system and its components.
Instructions for the operator
protrac® may be operated only by authorised and trained electrical engineers. An
electrical engineer is a person who, owing to his professional education (electrical en-
gineering), knowledge, experience and familiarity with the applicable standards and
regulations, can assess the tasks assigned to him and detect possible dangers.
The operator must also be familiar with the operation of protrac® and the devices
used, as well as with the pin-pointing process.
Warranty
For warranty claims, please contact BAUR GmbH or your local BAUR representative
(http://www.baur.eu/baur-worldwide). The warranty is void in case of improper use.
Wear parts are excluded from the warranty.
protrac® pin-pointing system 822-186-4

Baur Protrac Specifications

General

Brand	Baur
Model	Protrac
Category	Measuring Instruments
Language	English