6
For your safety
Avoiding dangers, taking safety measures
» When using protrac®, you must comply with the following regulations and guide-
lines:
• Local safety and accident prevention regulations
• National safety instructions and regulations
• Relevant national and international regulations, standards and guidelines
• EN 50110 (EU/EFTA countries) or applicable standards in your country.
» Operate the system only in a technical perfect condition.
» Only use accessories and original spare parts recommended by BAUR.
» If you are not going to use the control unit or the acoustic ground probe for an
extended period, remove the rechargeable or non-rechargeable batteries from the
battery compartment.
Dangers when working with batteries
The charger for the control unit and the acoustic ground probe may only be used for
charging the rechargeable batteries.
» Never use the charger to charge non-rechargeable batteries. This can lead to fire or
cause an explosion.
Danger symbols
General danger
Risk of electric shock
Danger of explosion
View settings
Symbol Meaning
Indicates information on the topic in the corre-
sponding user manuals.
Indicates required tools.
Indicates required spare parts.
protrac® pin-pointing system 822-186-4
To Next Page
Loading...
Need help?
General
