26
Method settings
Parameters Meaning
Signal evaluation
•
AC
: only the change to the signal
is displayed (capacitive decoupling).
•
DC
: the input signal is measured
and displayed directly.
Zero point adjust-
ment
Is used to activate and deactivate the
zero point adjustment
If the function is activated, protrac®
compensates for disruptive external
signals and automatically adjusts the
zero point of the scale.
Voltage indicator
Is used to set whether the voltage indi-
cator is adjusted automatically ( ) or
manually ( ).
Basic settings
Calls up the basic settings for protrac®
protrac® pin-pointing system 822-186-4
Sheath fault location – tips, settings
To Next Page
Loading...
