Baur Protrac - Tracing: Method Settings; Parameter Configuration

31
Method settings
Parameters Meaning
Frequency selection
Is used to select the frequency used for
tracing
Method Is used to set whether tracing is perfor-
med using the maximum ( ) or the
minimum ( ) method
Sound modulation Is used to set how the signal output
behaves when the AGP is moved back
and to:
• AM : The volume of the signal
changes.
• FM : The pitch of the signal changes.
You can also set 500 or 1,000 Hz as the
central frequency.
Magnetic signal gain • Automatic : The gain is automatically
set to the optimal level in accordance
with the selected method.
• Manual : You can enter the gain for
each AGP coil yourself.
Basic settings Calls up the basic settings for protrac®
protrac® pin-pointing system822-186-4
Tracing – tips, settings