43
INSTALLER Section (en)
7219620.01 (1-04/15)
20. TECHNICAL SPECIFICATIONS
Model: LUNA DUO-TEC+ 1.12 GA 1.24 GA 1.28 GA 24 GA 28 GA 33 GA 40 GA
Cat.
II2H3P
Gas used - G20 - G31
Rated heat input for DHW circuit. kW - - - 24,7 28,9 34,0 41,2
Rated heat input for heating circuit. kW 12,4 24,7 28,9 20,6 24,7 28,9 33,0
Reduced heat input kW 2,1 3,5 4,1 3,5 3,9 4,8 5,9
Rated heat output for DHW circuit kW - - - 24,0 28,0 33,0 40,0
kW 12,0 24,0 28,0 20,0 24,0 28,0 32,0
kW 13,1 26,1 30,5 21,8 26,1 30,6 34,9
kW 2,0 3,4 4,0 3,4 3,8 4,7 5,7
kW 2,2 3,7 4,3 3,7 4,1 5,1 6,3
% 105,8 105,7 105,7 105,8 105,8 105,8 105,8
bar 3
bar 0,5
l 8 8 8 8 8 10 10
Minimum pressure of expansion vessel bar 0,8
bar - - - 8,0 8,0 8,0 8,0
bar - - - 0,15 0,15 0,15 0,15
l/min - - - 2,0 2,0 2,0 2,0
l/min - - - 13,8 16,1 18,9 22,9
l/min - - - 9,8 11,5 13,5 16,4
l/min - - - 11,5 13,4 15,8 19,1
Temperature range in heating circuit 25÷80
Temperature range in DHW circuit 35÷60
- C13 - C33 - C43 - C53 - C63 - C83 - B23
mm 60/100
Diameter of separate outlets mm 80/80
kg/s 0,006 0,012 0,014 0,012 0,014 0,016 0,019
kg/s 0,001 0,002 0,002 0,002 0,002 0,002 0,003
Max. temperature of fumes 75 80 80 80 80 80 80
mbar 20
mbar 37
V 230
Hz 50
W 72 85 90 85 99 106 111
kg 34,5 34,5 36 38,5 38,5 39,5 41
Dimensions - height mm 763
mm 450
- depth mm 345
- IPX5D
CONSUMPTION AT HEAT INPUT Qmax and Qmin
Qmax (G20) - 2H m
3
/h 1,31 2,61 3,06 2,61 3,06 3,60 4,36
Qmin (G20) - 2H m
3
/h 0,22 0,37 0,43 0,37 0,41 0,51 0,62
Qmax (G31) - 3P kg/h 0,96 1,92 2,25 1,92 2,25 2,64 3,20
Qmin (G31) - 3P kg/h 0,16 0,27 0,32 0,27 0,30 0,37 0,46