baxter AK 98 Training Material

117
HYGIENIC MAINTENANCE I Cleaning, decalcification and disinfection schedule*
Frequency
Activity
Result
After each treatment
1. Wipe the outside of the dialysis machine with 70% ethanol or 60% isopropanol or1% sodium
hypochlorite. In case of cleaning with hypochlorite, wipe afterwards with water.
2.
Rinse the outside and flush the inside of the pick-
up tubes with water. Let them dry naturally.
3.
If the prime bucket is used, wipe the inside and outside with maximum 10% sodium
hypochlorite.
Exterior cleaning
After each treatment, or at least once
per day
Run a disinfection program
Disinfection
After each treatment, if no disinfection
program is run
Run a descaling program
Descaling
At least after every 3rd treatment or at
high usage of the equipment at least
once per day
Run a heat disinfection program together with
CleanCart C*
cartridge or a heat disinfection
program with liquid citric acid
Decalcification
Disinfection
At least once every 7th treatment day
Cleaning using
CleanCart A*
1.
Run a heat
CleanCart A*
program
2.
Run a heat
CleanCart C*
program or a heat disinfection program with liquid citric acid
3.
Rinse the outside and flush the inside of the pick-
up tubes with water. Let them dry naturally.
Cleaning using sodium hypochlorite
1.
Run a heat
CleanCart C*
or a heat disinfection program with liquid citric acid
2.
Run a chemical disinfection with sodium hypochlorite
3.
Wipe the outside and flush the inside of the pick-up tubes with 70 % ethanol. Let them dry
naturally
Cleaning
Decalcification
Disinfection
*Not available in all markets
HC10139 |

baxter AK 98 Specifications

General

Brand	baxter
Model	AK 98
Category	Medical Equipment
Language	English