Baxtran BR80 - Automatic Memory Accumulation Modes

ENENUSER’S MANUAL BR80-BR90
32
11. AUTOMATIC MEMORY ACCUMULATION
Selectionofmanual/automaticaccumulationfunction(Selectionofmanual/automaticprintfunction).Selectionofanimalscale,peakvalue
retain and counting function.
STEP OPERATION DISPLAYING CONTENIDOS
1
Press
n 12
To display times of accumulation.
2
Press
AUt 0
Theselectionofmanual/automaticaccumulationAUt=0,manualaccu-
mulation
AUt=1,automaticaccumulationandprintwhenweightisadded,
indicator is lit.
AUt=2,automaticmemorizedisplayedvaluewhenweightisadded.Accu-
mulate and print final stable values after load down to below 20 d.
indicator is lit.
AUt=3,dynamicweighingmethod.Atweighing>20d:thebuzzersounds
“du”andlockisdisplayedfor6seconds.Thenlockisreleasedforweighing
<20d; automatic accumulation and print. Suggest Flt>30. indi-
cator is list.
AUt=4,peakvaluefixedweighingmethod.At
weighing>20d, the buzzer sounds “du” and lock is displayed. When
weighing<20d,fixeddatadisplayswithflash,automaticaccumulationand
print. Lock can be released by pressing any key. indicator is lit.
AUt=5,dynamicweighingmethod.Manualaccumulationandprint.
AUt=6,peakvaluefixedweighingmethod.Manualaccumulationandprint.
AUt=7,countingfunction.*note
3
Press
AUt 0
Digits displays with flash.
4
Press
Press
Press
AUt 0
AUt 1
AUt 2
AUt 3
Sets F·S
Move binking digit to the right bit.
e.g. AUt=3 expresses dynamic weighing method.
5
Press
0
Return to normal weighing status.
* Note:(a)sampling:whennetweightonscaleiszero(tarecanberemovedbypressingtarekeyifnetweightisnotzero),thesample,
wichmustbe<200pieces,i.e.between1to199,isputonthescale.Press ,inputquantityofthesample(e.g.30),
Cnt030
is displayed. Press and to enter the desired value.
Press ,confirmthecompletionofsampling.Weighingstatusisredisplayed.Samplingismemorizedevenwithpoweroff.