Cleaning
6-2 User Manual
DMR V4C 3.3 (User Manual) V-4 06-May-2022
4. Lightly wipe the electrical connecting cable and the outside of the gas connection tube. Take care not
to allow cleaning solutions to enter the tubing.
5. Dry the V4C-O2E Oxygen Mixer surface and its accessories with a clean, soft, lint-free cloth.
Table6-1.Approved cleaning solutions for exterior Oxygen Mixer surfaces
Value
Mild dishwashing detergent
70% isopropyl alcohol (rubbing alcohol)
10% chlorine bleach (90% tap water)
Glutaraldehyde
Hospital disinfectant cleaners
Hydrogen peroxide
15% ammonia (85% tap water)
Ammonia-based household cleaners
Household cleaners