Baylis V4C-O2E - Manufacturer Contact Details

77 pages

Save Page as PDF

To Next Page

To Previous Page

Preface

x User Manual

DMR V4C 3.3 (User Manual) V-4 06-May-2022

Manufacturer

Baylis Medical Technologies

2645 Matheson Blvd. East

Mississauga, Ontario

Canada

L4W 5S4

[T] +1 (905) 948-5800

Main Page

Table of Contents4
Purpose of this Manual8
Qualification of Personnel8
Warranty8
Manufacturer9
Safety Information10
Definitions10
Warnings10
General Warnings Regarding Use of Equipment10
Warnings Regarding Installation and Accessories13
Fio2 Readings and Calibration15
Warnings Regarding Environmental Conditions15
Warnings Regarding Oxygen Supply16
Warnings Regarding Alarms and Troubleshooting17
Warnings on Storage and Maintenance18
Warnings Regarding Filters19
Symbols and Labels20
Table 1-1. V4C-O2E Oxygen Mixer Symbols20
Table 1-2. V4C-O2E Oxygen Mixer Labels and Markings22
Figure 1-1. Location of Labels - Rear View23
Figure 1-2. Location of Labels - Bottom View23
Figure 1-3. Location of Labels - Side View23
Overview24
Indications for Use25
Target Patients25
Target Environments25
Target Operators26
Contraindications26
Operational Use26
Compatible Ventilators26
Operating Parameters27
Figure 2-1. O2E Port on the V4C-560 Ventilator27
Device Features28
Figure 2-2. V4C-O2E Oxygen Mixer Features on the Front and Back Panels28
Table 2-2. Figure 2-2 Legend28
Specifications29
Environmental and Storage Conditions29
Table 2-3. V4C-O2E Oxygen Mixer Specifications29
Battery Capacity30
Table 2-4. Environmental Conditions for Operation30
Table 2-5. Environmental Conditions for Storage and Shipping30
If Failure Occurs31
Table 2-6. Internal Battery Reserve Capacity31
Alarms and Troubleshooting32
Troubleshooting Overview33
Table 3-1. V4C-O2E Oxygen Mixer Troubleshooting34
Installation and Assembly37
Figure 4-1. Attaching the First Side Arm40
Figure 4-2. Attaching the Second Side Arm40
Figure 4-3. Compatible Ventilator Feet Location41
Figure 4-5. Lowering the Compatible Ventilator Onto the V4C-O2E Oxygen Mixer42
Figure 4-6. Installing the Handle43
Figure 4-7. Gas Connection Tube Adapter Installed on the Gas Connection Tube43
Figure 4-8. Installing V4C-O2E Oxygen Mixer Connections and Air Intake Filter44
Figure 4-9. Gas Connection Tube and Adapter Connected to the Ventilator44
Table 4-1. Figure 4-8 Legend44
Figure 4-10. Confirming no Filter Is Installed on the Back of the V4C-560 Ventilator45
Figure 4-11. Red Markings on the Electrical Cable and O2E Port46
Disassembly47
Operating Procedures49
Fio 2 Sensor Calibration55
Changing Fio During Ventilation Using a Compatible Ventilator55
Stopping Ventilation While Using the V4C-O2E Oxygen Mixer56
Using the Compatible Ventilator Without the V4C-O2E Oxygen Mixer56
Cleaning57
Table 6-1. Approved Cleaning Solutions for Exterior Oxygen Mixer Surfaces58
Routine Maintenance59
Figure 7-1. V4C-O2E Air Intake Filter Location60
Theory of Operation61
Figure 8-1. V4C-O2E Oxygen Mixer Theory of Operation61
Figure 8-2. Internal Function of the Mixing Valve62
Operational Verification Checklist and Functional Testing63
Operations Verification Checklist63
Functional Tests65
Table 9-1. Operational Verification Checklist65
Test 1 - Compatible Ventilator Alarms Test66
Test 2 - High Fio2 Test66
Test 3 - Low Fio2 Test67
Test 4 - Fio2 Alarms Test68
Part Numbers69
Table 10-1. Part Numbers69
Unpacking and Accessories70
Table 11-1. Parts and Accessories Provided with the V4C-O2E Oxygen Mixer71
Electromagnetic Emissions and Immunity72
Table 12-1. Electromagnetic Emissions72
Table 12-2. Electromagnetic Immunity72
Table 12-3. Electromagnetic Immunity - Conducted and Radiated RF73
Glossary74

Baylis V4C-O2E - Manufacturer Contact Details

Table of Contents

Other manuals for Baylis V4C-O2E