BBE BenthoTorch - Page 56

The Menus
bbe BenthoTorch Manual Page 56
All parameter sets in the database can be displayed. To choose one parameter set, select the date from the
drop-down box:
Recalc – advanced functionality only
The recalculation option is available in all instruments except for the AlgaeTorch. For the BenthoTorch the
recalculation is limited to the recalculation by using another parameter set from the BenthoTorch. Editing of the
parameter sets and templates are not available for the BenthoTorch.
To change the settings and recalculate the results, the following steps have to be executed:
1. Select the instrument and time period (“W INDOW  S ELECT D ATA ”).
2. Go to “P ARAMETERS  R ECALC ”
3. Select a new dataset from the dropdown box or create a new one by editing a copy. Please note: only copies
of an original parameter set can be edited. These sets are marked with “adapted”.