75.0084.05 20110720 Page 12 of 17
ANSI / AAADM Compliance: American Association of Automatic Door Manufactures AAADM
Upon finishing the installation and/or service work perform at a minimum a daily safety check in accordance with the
minimum inspection guidelines provided by AAADM. Provide each owner with an owner’s manual that includes a daily
safety checklist and contains at a minimum the information recommended by AAADM. Offer a familiarization session
with the owner explaining how to do daily inspections and calling out location of cutoff switches to put equipment out
of service if a deficiency is noted. The equipment should be inspected in accordance with the minimum inspection
guidelines annually. A safety check that includes at a minimum the items listed on the safety information label must be
performed during each service call. If you are not an AAADM certified inspector BEA strongly recommends to have an
ANSI /AAADM
COMPLIANCE
AAADM certified inspector perform an AAADM inspection and placing a valid inspection sticker below the safety
information label prior to placing the equipment into operation.
COMPANY
CONTACT
To Next Page
Loading...
