Programming
BC8050 und BC8150 53Version: 3.0.0
Source code only: the prx file with information on the online change is transferred. Login via online change
is possible (the PLC does not stop).
All files: as Source code only, plus all required libraries.
Source code only (compile info excluded): only the prx file is transferred. Login is only possible when the
PLC stops.
Which option you can use depends on the size of your projects.
Downloading a program
The source code can be transferred to the target system on request. This requires the user to be logged in
with his program. Under Online/Source code download the program code can now be transferred to the Bus
Terminal Controller.
Fig.50: Downloading the program code
After a short delay, a window will open that indicates the download progress.
Fig.51: Download progress
To Next Page
Loading...
