Beckhoff CU2508 User Manual

Foreword
Real-time Ethernet port multiplier 7
Version: 2.6
1.3 Documentation issue status
Version Comment
2.6 - Chapter „Firmware Update“ updated
- Update revision status
- Update structure
2.5 - Chapter „Technical data“ updated
- Chapter „Technology“ updated
- Update revision status
- Update structure
2.4 - Chapter „Technology“ updated
- Update revision status
- Update structure
2.3 - Chapter „Technology“ updated
- Update revision status
- Update structure
2.2 - Chapter „Firmware Update“ updated
- Update revision status
- Update structure
2.1 - Chapter „Portdefinition TwinCAT 2.11“ updated
- Chapter „Technical data“ updated
- Update structure
2.0 - Migration
1.8 - Update chapter "LEDs and connection"
- Update structure
1.7 - Addenda chapter "Setting up under TwinCAT 2.11"
1.6 - Addenda chapter "Setting up: PROFINET Controller/
Device"
1.5 - Addenda chapter "Technology"
1.4 - Addenda note chapter Ethernet/IP slave
1.3 - Addenda RT Ethernet
1.2 - Addenda current firmware status
1.1 - Addenda Ethernet/IP slave
1.0 - Corrections, 1
st
public issue
0.1 - Preliminary documentation for CU2508
1.4 Version identification of EtherCAT devices
Designation
A Beckhoff EtherCAT device has a 14-digit designation, made up of
• family key
• type
• version
• revision

Beckhoff CU2508 Specifications

General

Brand	Beckhoff
Model	CU2508
Category	Switch
Language	English