Beckhoff CU2508 - User Manual

Documentation
CU2508
Real-time Ethernet port multiplier
2.6
2020-05-19
Version:
Date:

Summary

Foreword

CU2508 Safety Instructions

Explains safety symbols (Danger, Warning, Caution, Note) and general safety regulations.

Product Overview

CU2508 Technical Specifications

Lists detailed technical specifications of the CU2508 device.

Mounting and Wiring

CU2508 Mounting and Demounting Guide

Details the procedure for mounting and demounting the CU2508 on a DIN rail.

CU2508 Connection Details: LEDs and Cabling

Commissioning

CU2508 Setup with TwinCAT 2.11

Guides on setting up the CU2508 in TwinCAT 2.11.

EtherCAT Port Configuration in TwinCAT 2.11

Details how to set up a CU2508 downlink port as an EtherCAT device.

EoE Settings for CU2508

EtherCAT Cable Redundancy Configuration

Describes how to set up EtherCAT cable redundancy using CU2508 ports.

EAP Real-time Ethernet (Push Mode) Setup

Guides on setting up real-time Ethernet for EAP Publisher/Subscriber.

EAP Real-time Ethernet (Polling Mode) Setup

Details setting up real-time Ethernet for BK90xx, ADS/RAW, and EAP polling.

PROFINET Controller;Device Configuration

Explains how to set up PROFINET controller or device functionality with CU2508.

Introduction to Beckhoff EAP Network Variables

Publisher Configuration for Beckhoff EAP

Subscriber Configuration for Beckhoff EAP

Beckhoff Network Variables Settings and Protocols

Beckhoff CU2508 Specifications