16
Miditherm MP
Reducing or increasing temperature in running program
Example
After the end of the program (LED flashes)
the furnace temperature is 800°C. Further heating
to 900°C is desired.
• Keep depressed until LED “°C/min.” flashes.
‚ Press (LED „°C“ flashes).
ƒ Press / until desired temperature
appears.
„ Keep depressed until LED “°C” lights up.
Notes
• To change the temperature during the running
program, never press the button!
Pressing this button ends the program. Pressing
it again would restart the program, beginning
with holding level 1.
• The temperature of the furnace can be changed
at every time of a running program. The change
will not be stored permanently in the program.
•
. . . .
To Next Page
Loading...