FX Rack
1. Press the EFFECTS button near the screen to see an overview of the 8 stereo FX processors. Keep in mind that
FX slots 1-4 are for “Send” type FX and slots 5-8 are for “Insert” type FX.
2. To edit the FX, use the 6th rotary encoder to select an FX slot.
3. While a FX slot is selected, use the 5th rotary encoder to change which eect is in that slot. Press the encoder to
edit the parameters for that eect.
4. Over 40 eects include Reverbs, Delay, Chorus, Flanger, Limiter, 31-Band GEQ, and more.
To Next Page
Loading...
