BEIER-Electronic MSM-1 - Technical Data

GB Sound module MSM-1
5 BEIER-Electronic 18.01.2024
Technical data
Supply voltage (Ub):
5 - 14V DC voltage
Power consumption:
Standby current: approx. 60 mA
Operation: The current consumption depends on
the volume and switched load.
Proportional inputs:
6 pieces PWM (1.000 – 2.000 ms)
Switching outputs:
8 pieces (minus switching, open collector),
max. 1.5 A per output, the total current of these
outputs must not exceed 3.0 A
AF amplifier:
20 W
Recommended speakers:
4 – 8 Ω
Volume setting:
Possible with external potentiometer (100 kΩ)
and/or radio control
Storage for the sound data:
Internal flash 64 MB
Sound output:
16 bit, mono, 22 kHz
Model types:
14 models
• 3 x Trucks
• 2 x Cars
• 1 x Emergency vehicle
• 1 x Tractor
• 2 x Construction vehicle
• 3 x Tanks
• 3 x Ship
Available sounds:
• Driving sounds (starting sound, shutdown
sound, starting sound, stopping sound,
stationary sound, braking sound, reversing
warning, cornering squeak, indicator sound)
• Various additional sounds depending on the
model (horn, compressed air fan, ship's horn,
depth sounder, turret turning, machine gun,
cannon shot, radio message, animal noises,
hydraulic noise, siren, announcements)
Additional ports:
Interface for data cable K-USB-2 (currently not
working!) or IR transmitter diode for light
modules LM-IR-8-1 and LM-IR-16-4
Protection features:
Current monitoring of the switching outputs
Ambient temperature:
0 – 60° C
Permissible relative humidity:
Max. 85 %
Size:
51 x 33 x 17 mm
Weight:
18 g