Image and CODESYS update
5 ImageandCODESYSupdate
The operator panel comes pre-loaded on delivery with an image.
iX Runtime can be updated via ethernet using a PC.
The Image Loader utility is used to create Image Loader SD cards and USB-sticks
or to transfer a panel image to an operator panel over ethernet.
Theimagecanbeupdatedinthefollowing
way:
Updatemethod iXDeveloperpro jectre main s IPadressremains
Ethernet X X
USB X X
SD X X
RecoverySDcard - -
Ifyouwantacomplet
esystemupdate,chooseMakeRecoverySDcard. The
iXDeveloperwillth
enbesettodefaultsettings,exceptfortouch.
5.1 Updatingthepa
nelimageusingU SB
orSDcard
5.1.1 Preferre
dway
Using a USB flash drive or SD card to update the image in an operator panel is the
preferred method of updating the panel. This makes it possible to upgrade the
panel image without the use of a PC.
BeijerElectronics, MAEN205G
19